- Turn the power switch off and back on to recycle the power.
- Press the Break key or key sequence to put the router into ROM Monitor mode. The break key varies by computer or terminal software. The sequence might be CTRL-D, CTRL-Break or another combination.
- At the > prompt, type 0 to record the current value of the configuration register normally 0x2102, or 0x102.
- Type o/r 0x2142 to tell the router to boot from flash without loading the configuration in NVRAM at the next reload.
- Type i to have the router reboot. The router ignores the configuration in NVRAM.
- The router runs the setup dialog, Type no or press Ctrl-C to skip the initial setup Dialog.
- Type enable ate the Router> prompt to go to privileged exec mode.
- Copy the startup configuration to the running configuration by using the configure memory or copy startup-config running-config commands. Do not type configure terminal. If you use the configure terminal command, you overwrite the configuration stored in NVRAM.
- View the configuration by typing write terminal or show running-config. View the configured line, vty and enable passwords. Any encrypted passwords need to be changed.
- Enter the configuration mode by typing configure terminal. Change the line of enable passwords as necessary.
- All interfaces are in a shutdown state. Issue the no shutdown command on every interface that is to be used.
- Type config-register 0x2102 to return the router to normal operation at the next reloads.
- Exit configuration mode by pressing Ctrl-Z
- Save your changes by typing write memory or copy running-config startup-config.
- Reload the router and verify the passwords.
Thanks & regards,
"Remember Me When You Raise Your Hand For Dua"
Raheel Ahmed Khan
System Engineer
send2raheel@yahoo.com
send2raheel@engineer.com
sirraheel@gmail.com
send2raheel (skype id)
My Blog Spot
http://raheel-mydreamz.blogspot.com/
http://raheeldreamz.wordpress.com/
My Face book pages
http://www.facebook.com/pages/My-Dreamz-Rebiuld-our-nation/176215539101271 @[176215539101271:0]
http://www.facebook.com/pages/Beauty-of-islam/223983470988333?sk=wall @[223983470988333:0]
http://www.facebook.com/pages/Health-is-wealth/289486761065829?sk=wall @[289486761065829:0]
>o
Configuration register = 0x2102 at last boot
Bit# Configuration register option settings:
15 Diagnostic mode disabled.
No comments:
Post a Comment